TDS Conductivity measurements are used routinely in several industrial and environmental applications as a fast,
inexpensive and reliable way of measuring ionic Content in a solution. The measurement of product conductivity
is a typical way to monitor and continuously trend the performance of water purification systems. we at Infinity,
offer you a full range of conductivity and TDS meters.
- TC : TDS + Conductivity
- TC + : Relay Cut - Off + TDS + Conductivity
- TCS : High Accuracy TDS + Conductivity
- TCS + : High Accuracy + Relay Cutoff +TDS + Conductivity
FEATURES
- NABL / ERTL Standards
- Push Button Front keys for easy set up
- Individual high & Low Set point relay for alarm or signal to
- PLC or can be used for proportional acid / alkali dosing
- 4 Digit 7 Segment Display along with relay status
METER
- High Flow Trip
- Low Flow Trip
- Particular Amount of Volume Passed in Batch & Trip
SENSORS
- Flow in Liter & Flow in m³ Set
- Passed Particular Volume Tripping Set
- Display Scrolling On / Off Set
- Display Scrolling Time Set
- Flow 1 & Flow 2 Size Differently Set
- Flow 1 & Flow 2 Tripping Differently Set
SENSOR SPECIFICATIONS
- Sensor body: Nylon
- Rotor (impeller): PP
- Shaft: Carbide
- Bearing: Ceramic
- Sensing Element: Hall Effect I.C.
- Maximum Pressure: 5 kg/cm²
- Maximum Temperature: 60°C
- Accuracy: ± 2% of Full Scale
METER SPECIFICATIONS
- Physical Dimensions: 96(W) x 96 (L) x 53 (D) mm
- Cut Out Size: 92(W) x 92 (L) mm
- Enclosure: ABS
- Mounting: Panel
- Input Supply: 230 V A.C.
- Display: 4 Digit 7 Segment Display
- Calibration: Using Internal Setting
- Temperature: 0-60 ºC
- Ranges (ppm): 1 to 1000 ppm
- Ranges (µs/cm²): 1 to 2000 µs/cm²
SENSOR
- MOC: SS316L & Nylon
- End CONNECTION: 3/4” & 1/2” BSPM
- Cell Constant: 0.1 k
- Cable: 2 Core Shielded
- Cable Length: 3 Feet
- Max. Temperature: 0-60 ºC
- Max. Operating Pressure: 5 kg/cm²
|
Modals / Specification |
TC | TC + | TCS | TCS+ |
|---|---|---|---|---|
|
Resolution |
2.5 mV |
2.5 mV |
9.766 µV |
9.766 µV
|
|
Accuracy |
±5% |
±5% |
±2%
|
±2% |
|
Relay |
- |
10A/230V |
- |
10A/230V |
FEATURES
- NABL / ERTL Standards
- Push Button Front keys for easy set up
- Individual high & Low Set point relay for alarm or signal to
- PLC or can be used for proportional acid / alkali dosing
- 4 Digit 7 Segment Display along with relay status
A new world of dosing performance and effectiveness awaits. Simply click below to begin your journey
