- 6 LPH @ 4 bar Pressure
- Infinity positive displacement diaphragm metering pump operating at 230V, 50Hz supply.
- It is base mountable. Solenoid push the diaphragm which in turn pushes the liquid into the system.
- Solenoid is actuated by a solid state electronic circuit. It has controls for the desire accuracy of the dosing.
ELECTRONIC CIRCUIT
- State of the art electronic circuit (protectively coated with epoxy) is virtually unaffected by temperature, magnetic fields & other electric disturbances
MOC
- PP, PVDF, PTFE, Ss316 & Alloy20
SOLENOID
- High quality, hot rated solenoid is designed to dissipate heat. Capacities & pressure do not derate even over extended use
DIAPHRAGM
- Superior imported quality Solid PTFE diaphragm.
- Is designed to ensure to long life even under the most demanding applications.
SCOPE OF SUPPLY
- Metering Pumps
- 3 Meter Suction Discharge Tubling
- Suction Filter Cum Foot Valve
- Injection NRV Valve
- O & M Manual
INSTALLATION AND COMMISSONING
- Install the pump in dry environment using four nut bolts.
- Cut the suction tubing provided to the desired length (Max 1 Mtr) & Ensure that the suction filter remains vertical & always immersed in Solution.
- Use the remaining tubing to the discharge side & connect the plunge anti syphon valve to the pressure line in to which dosing is to be done.
- Connect the plunge of the dosing pump to the 230v AC supply.
GENERAL
PRECAUTION
- Always install the pump in a shaded place not in direct sunlight.
- Switch on the pump using power on/off switch
- Disconnect power supply before attempting to service the pump.
- Ensure that voltage is in the range of 180 to 280 volts.
- If the dosing tank runs out of solution and the suction filter is exposed to air release operation when restarting the pump ensure that pump is never submerged in liquid.
SPECIFICATION
- Dosing rate @ 4 kg/cm²: 6.0 LPH (IDP 6)
- Suction/Discharge tubing: 4/6 mm
- Frequency: Up to 400 SPM
- Electrical: 230V AC, 50 Hz
- Power Consumption: 30 Watts
- Fuse: 500mA / 230V AC
- Pump Stroke per minute: 120 Max ( Adjustable)
- Negative Suction: 1 Mtr
- Environment Temperature: 40°C Max
- Head: HDPE
- Diaphragm: Teflon (PTFE)
- NRV Ball: Ceramic
FEATURES
- Less noise
- Economica
- Easy to operate
- Maintenance free
- AUTO Resetting fuse
- Inbuilt Air Relief Valve
- Splash proof enclosure
- Built in air release valve
- Compact and light weight
- PTFE diaphragm for longer life
- Double ball NRV with PTFE seal
- Adjustable frequency (up to 40 spm)
- World class next generation Dosing Pumps
A new world of dosing performance and effectiveness awaits. Simply click below to begin your journey
